







Light For Me underwater light set: 7XML RCA Head + Universal Battery Canister
Seven diodes XMLII with total output of 7800 lumens make this head the strongest in the offer. Cold colour of light perfectly penetrates water.
Totally redesigned new lightweight head. Piezo switch without any rotary elements. Stainless steel gland.
Specially dedicated high quality optic.
Recessed in the housing. No rotary elements at all. No influence on compass. Piezo switch.
Universal Battery Canister is dedicated to be used with light-for-me light heads equipped with RCA connector as part of underwater main light.
Universal Battery Canister does not contain any battery pack. It allows user to choose the battery pack of their preference bearing in mind the internal dimensions of the canister and power drawn by the light head. Preferred battery packs: Lithium-ion of 11.1 or 14.4V. The minimum capacity of the battery pack should be adapted to the power of the light head, with 7XML light head minimum 160Wh required.
ACCU container is built from anodised aluminum (tube) and delrin (top and bottom lids). RCA ports are made from stainless steel.
Canister is equipped with two RCA connection ports that can be wired directly to the battery pack. It comes with one RCA port cap that protects the RCA port and battery pack if one port is unused.
Accu container requires minimum but regular mentenance after diving. RCA ports need drying and sealing orings inside them need greasing.
In order to calculate burn time of the light head, you need to know the V and Ah of the battery pack and W of the light head. Let’s take, as example, battery pack 14.4V 11.25Ah and 7XML RCA head that takes 84W:
To calculate Watt-hours of the battery pack: 14.4V x 11.25Ah = 162Wh To check the max burn time: 162Wh / 84W = 1.9h*
*Battery packs have built in protection module that will not allow the battery to be drained, therefore the calculated burn time is only for illustrative purposes.
Check our different products from this category.