










Light For Me underwater light set: NW7 RCA Head + Universal Battery Canister + Codura Bag
Dual channel driver and two different LED modules give variable angle of light. In one torch there are two independent LEDs modules. Both channels have different angle of light beam.
Electronic piezo switch combined with microprocessor electronic control. Piezo swich allows to swich on/off and switch between the modes.
One group of four XPE II Leds and one group of three XML II Leds give two modes of light. Four XPE II give very narrow and cold beam of light which is perfect for underwater communication. Three XML II Leds with very wide optics are perfect for wide lighting. Working both together or separately. Perfect underwater communication and additionally nice lighting.
The lowest possible position makes the head very comfortable to hold.
Small size and weight of the head makes this model a very modern solution in underwater lighting.
Universal Battery Canister is dedicated to be used with light-for-me light heads equipped with RCA connector as part of underwater main light.
Universal Battery Canister does not contain any battery pack. It allows user to choose the battery pack of their preference bearing in mind the internal dimensions of the canister and power drawn by the light head. Preferred battery packs: Lithium-ion of 11.1 or 14.4V. The minimum capacity of the battery pack should be adapted to the power of the light head, with NW7 light head minimum 99Wh required.
ACCU container is built from anodised aluminum (tube) and delrin (top and bottom lids). RCA ports are made from stainless steel.
Canister is equipped with two RCA connection ports that can be wired directly to the battery pack. It comes with one RCA port cap that protects the RCA port and battery pack if one port is unused.
Accu container requires minimum but regular mentenance after diving. RCA ports need drying and sealing orings inside them need greasing.
In order to calculate burn time of the light head, you need to know the V and Ah of the battery pack and W of the light head. Let’s take, as example, battery pack 14.4V 11.25Ah and NW7 RCA head that takes 48W:
To calculate Watt-hours of the battery pack: 14.4V x 11.25Ah = 162Wh. To check the max burn time: 162Wh / 48W = 3.3h*
*Battery packs have built in protection module that will not allow the battery to be drained, therefore the calculated burn time is only for illustrative purposes.
Check our different products from this category.